#Secco Sistemi

ST 65

The profiles of the thermal break system ST 65 have a depth of 73 mm and can hold insulating glazing panels of up to 32 mm. The leaves and frames are flush-mounted both externally and internally.

ST 65 is characterized by the style moldings of the external profile of the window and the glazing bead.


  1. glazing bead
  2. fitting groove for glazing of up to 32 mm thick
  3. fitting groove for hardware
  4. coplanarity on the exterior and overlap on the interior
  5. frame with weep system and triple gasket
  6. structural thermal break in polyamide and polyurethane


The small profiles placed in front of the glass to fix it are also design elements of the frame and are produced in the same finishes as the frame



To better integrate into the window frame, the hinges are slender, minimal and provided in the same finishes as the frame. In tilt and turn, the hinges can be concealed

two-wing hinge stainless steel corten steel

three-wing hinge stainless steel corten steel

concealed only for doors galvanized steel


Discrete, geometric, minimal and in the same finishes as the frame, the handles integrate perfectly into the frame

vitruvio tronca stainless steel brass

vitruvio quadra stainless steel corten

vitruvio tonda stainless steel brass

vitruvio ovale stainless steel brass


ST 65 is composed of an external extruded profile and profiled internally

brass natural burnished


Download supporting documents & brochures here